Tweeter assembly (left A-pillar)高音扬声器总成(左A柱)
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the left A-pillar upper trim panel assembly2. 拆卸左A柱上饰板总成
|
|
3. Remove the tweeter assembly3. 拆卸高音扬声器总成
|
 |
1 Pry out tweeter assembly A.撬出高音扬声器总成A。
|
Installation procedure安装程序
|
1. Install the tweeter assembly1. 安装高音扬声器总成
|
|
|
1 Place and adjust tweeter assembly A to the installation position, and press firmly to ensure it is installed in place.放置并调整高音扬声器总成A到安装位置，用力按压确保安装到位。
|
|
2. Install the left A-pillar upper trim panel assembly2. 安装左A柱上饰板总成
|
|
3. Connect the negative terminal of the 12V battery, start the vehicle, and check that the audio and entertainment system should work normally.3. 连接蓄电池负极，启动车辆，检查音响娱乐系统应正常工作
|