Second row left seat belt double buckle lock第二排左侧安全带双插扣锁

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the second row seat cushion assembly2. 拆卸第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

3. Remove the double buckle lock of the second row left seat belt3. 拆卸第二排左侧安全带双插扣锁

1 Disconnect connectors A and B (if equipped), remove the fixing bolt ①, and remove the double buckle lock C of the second row left seat belt.断开接插件A、B(如有配置)，拆卸固定螺栓①，取下第二排左侧安全带双插扣锁C。 Recommended tools: 14mm socket推荐工具：14mm套筒

Installation procedure安装程序

1. Install the second row left seat belt double buckle lock1. 安装第二排左侧安全带双插扣锁

1 Place and adjust the double buckle lock C of the left seat belt of the second row to the installation position, install and tighten the fixing bolt ①, and connect connectors A and B (if configured).放置并调整第二排左侧安全带双插扣锁C到安装位置，安装固定螺栓①并紧固，连接接插件A、B(如有配置)。 Recommended tools: 14mm socket推荐工具：14mm套筒 Torque requirement: 50-60N·m扭矩要求：50-60N•m

2. Install the second row seat cushion assembly2. 安装第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

3. Connect the negative terminal of the 12V battery, start the vehicle, and check that the double buckle lock of the left seat belt of the second row should work normally.3. 连接蓄电池负极，启动车辆，检查第二排左侧安全带双插扣锁应正常工作