Second row right seat belt single buckle lock第二排右侧安全带单插扣锁

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the second row seat cushion assembly2. 拆卸第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

3. Remove the second row right seat belt single buckle lock3. 拆卸第二排右侧安全带单插扣锁

1 Disconnect connector A (if equipped), remove the fixing bolt ①, remove the seat belt fixing buckle, and remove the second row right seat belt single buckle lock B.断开接插件A(如有配置)，拆卸固定螺栓①，移开安全带固定扣，取下第二排右侧安全带单插扣锁B。 Recommended tools: 14mm socket推荐工具：14mm套筒

Installation procedure安装程序

1. Install the second row right seat belt single buckle lock1. 安装第二排右侧安全带单插扣锁

1 Place and adjust the second row right seat belt single buckle lock B and the seat belt fixed buckle to the installation position, install the fixing bolt ① and tighten it, and connect the connector A.放置并调整第二排右侧安全带单插扣锁B与安全带固定扣到安装位置，安装固定螺栓①并紧固，连接接插件A。 Recommended tools: 14mm socket推荐工具：14mm套筒 Torque requirement: 50-60N·m扭矩要求：50-60N•m

2. Install the second row seat cushion assembly2. 安装第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

3. Connect the negative terminal of the 12V battery, start the vehicle, and check that the single buckle lock of the right seat belt of the second row should work normally.3. 连接蓄电池负极，启动车辆，检查第二排右侧安全带单插扣锁应正常工作