Left rear door outer handle assembly左后门外把手总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the left rear door switch panel assembly2. 拆卸左后门开关面板总成
|
|
3. Remove the left rear door trim panel assembly3. 拆卸左后门饰板总成
|
|
4. Remove the left rear door rear waterproof membrane4. 拆卸左后门后防水膜
|
|
5. Remove the left rear door outer handle assembly5. 拆卸左后门外把手总成
|
 |
1 Disconnect connector A.断开接插件A。
|
 |
2 Disconnect the left rear door lock assembly cable A from the left rear door outer handle assembly.断开左后门锁总成拉线A与左后门外把手总成的连接。
|
 |
3 Remove the 3 fixing screws ① and take out the left rear door outer handle assembly A.拆卸3颗固定螺钉①，取出左后门外把手总成A。
|
Installation procedure安装程序
|
1. Install the left rear door outer handle assembly1. 安装左后门外把手总成
|
 |
1 Place and adjust the left rear door outer handle assembly A to the installation position, install the 3 fixing screws ① and tighten them.放置并调整左后门外把手总成A到安装位置，安装3颗固定螺钉①并紧固。
|
|
|
2 Connect the left rear door lock assembly cable A to the left rear door outer handle assembly.连接左后门锁总成拉线A到左后门外把手总成。
|
|
|
3 Connect connector A.连接接插件A。
|
|
2. Install the left rear door rear waterproof membrane2. 安装左后门后防水膜
|
|
3. Install the left rear door trim panel assembly3. 安装左后门饰板总成
|
|
4. Install the left rear door switch panel assembly4. 安装左后门开关面板总成
|
|
5. Connect the negative terminal of the 12V battery, start the vehicle, and check that the left rear door outer handle should work normally.5. 连接蓄电池负极，启动车辆，检查左后门外把手应正常工作
|