Left rear door lock assembly左后门锁总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the left rear door switch panel assembly2. 拆卸左后门开关面板总成
|
|
3. Remove the left rear door trim panel assembly3. 拆卸左后门饰板总成
|
|
4. Remove the left rear door rear waterproof membrane4. 拆卸左后门后防水膜
|
|
5. Remove the left rear door lock assembly5. 拆卸左后门锁总成
|
 |
1 Disconnect the left rear door lock assembly cable A and disengage all the fixing clips.断开左后门锁总成拉索A，脱开所有固定卡扣。
|
 |
2 Remove the 3 fixing screws ①.拆卸3颗固定螺钉①。
3 Disengage the inner opening cable through-hole rubber sleeve, disconnect the left rear door lock assembly connector, and take out the left rear door lock assembly.脱开内开拉索过孔胶套，断开左后门锁总成接插件，取出左后门锁总成。
|
Installation procedure安装程序
|
1. Install the left rear door lock assembly1. 安装左后门锁总成
1 Connect the connector to the left rear door lock assembly.连接接插件到左后门锁总成。
|
|
|
2 Place and adjust the left rear door lock assembly to the installation position, install 3 fixing screws ① and tighten.放置并调整左后门锁总成到安装位置，安装3颗固定螺钉①并紧固。
|
|
|
3 Connect cable A to the left rear door outer handle assembly and install all fixing clips.连接拉索A到左后门外把手总成，安装所有固定卡扣。
4 Install the inner opening cable via hole rubber sleeve.安装内开拉索过孔胶套。
|
|
2. Install the left rear door rear waterproof membrane2. 安装左后门后防水膜
|
|
3. Install the left rear door trim panel assembly3. 安装左后门饰板总成
|
|
4. Install the left rear door switch panel assembly4. 安装左后门开关面板总成
|
|
5. Connect the negative terminal of the 12V battery, start the vehicle, and check that the left rear door lock assembly should work normally.5. 连接蓄电池负极，启动车辆，检查左后门锁总成应正常工作
|