Steering column lower guard assembly转向管柱下护罩总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

3. Remove the driver’s side lower cover panel assembly3. 拆卸驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

4. Remove the steering column lower guard assembly4. 拆卸转向管柱下护罩总成

1 Remove the 3 fixing screws ① and remove the steering column lower guard assembly.拆卸3颗固定螺钉①，取下转向管柱下护罩总成。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

Installation procedure安装程序

1. Install the steering column lower guard assembly1. 安装转向管柱下护罩总成

1 Place and adjust the steering column lower guard assembly to the installation position, install 3 fixing screws ① and tighten.放置并调整转向管柱下护罩总成到安装位置，安装3颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Install the driver's side lower cover panel assembly2. 安装驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

3. Install the driver's side lower left decorative panel assembly3. 安装驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

4. Connect the negative terminal of the 12V battery4. 连接蓄电池负极