Left rear door glass sliding strip左后门玻璃滑动胶条

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Remove the negative terminal of the 12V battery.拆卸蓄电池负极。

2. Remove the left rear door switch panel assembly2. 拆卸左后门开关面板总成 Reference: Left rear door switch panel assembly参考：左后门开关面板总成

3. Remove the left rear door trim panel assembly3. 拆卸左后门饰板总成 Reference: Left rear door trim panel assembly参考：左后门饰板总成

4. Remove the inner water cutter of the left rear door4. 拆卸左后门内水切 Reference: Water cut inside the left rear door参考：左后门内水切

5. Remove the left rear door glass sliding strip5. 拆卸左后门玻璃滑动胶条 1 Lower the left rear door window glass.降落左后门车窗玻璃。

2 Pull out the left rear door glass sliding strip from the slot in the direction of the arrow.沿箭头方向从卡槽中抽出左后门玻璃滑动胶条。

Installation procedure安装程序

1. Install the left rear door glass sliding strip1. 安装左后门玻璃滑动胶条

1 Insert and adjust the left rear door glass sliding strip in the direction of the arrow to the installation position.沿箭头方向插入并调整左后门玻璃滑动胶条到安装位置。   Note:提示： ♦  Before installation, spray an appropriate amount of soapy water on the glass sliding strip and installation location.安装前可在玻璃滑动胶条与安装位置喷洒适量肥皂水。

2. Install the left rear door inner water cutter2. 安装左后门内水切 Reference: Water cut inside the left rear door参考：左后门内水切

3. Install the left rear door trim panel assembly3. 安装左后门饰板总成 Reference: Left rear door trim panel assembly参考：左后门饰板总成

4. Install the left rear door switch panel assembly4. 安装左后门开关面板总成 Reference: Left rear door switch panel assembly参考：左后门开关面板总成

5. Connect the negative terminal of the 12V battery5. 连接蓄电池负极