Front compartment rear upper cover panel assembly机舱后上护板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the rear upper guard panel assembly of the front compartment2. 拆卸机舱后上护板总成

1 Remove all fixing points and remove the rear upper guard panel assembly of the front compartment.拆卸所有固定点，取下机舱后上护板总成。 Recommended tools: clip remover推荐工具：卡扣起子

Installation procedure安装程序

1. Install the front compartment rear upper cover panel assembly1. 安装机舱后上护板总成

1 Place and adjust the rear upper guard panel assembly of the front compartment to the installation position, press firmly and fasten it tightly, and install all fixing points.放置并调整机舱后上护板总成到安装位置，用力按压并紧扣，安装所有固定点。