Removal procedure拆卸程序
|
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
|
|
|
2. Remove the hood stay assembly2. 拆卸发动机罩撑杆组件
|
|
|
1 Remove the fixing bolts ① and take off the hood stay assembly.拆卸固定螺栓①，取下发动机罩撑杆组件。
|
|
Recommended tools: 10mm socket推荐工具：10mm套筒 |
|
|
Caution:注意： |
|
♦
|
Use a substitute to support the hood or a helper to prevent the hood from falling suddenly.使用替代物支撑发动机罩或助手协同操作，防止发动机罩突然下落。 |
|
|
|
Installation procedure安装程序
|
|
1. Install the hood stay assembly1. 安装发动机罩撑杆组件
|
|
|
1 Place and adjust the hood stay rod assembly to the installation position, install the fixing bolts ① and tighten them.放置并调整发动机罩撑杆组件到安装位置，安装固定螺栓①并紧固。
|
|
Recommended tools: 10mm socket推荐工具：10mm套筒 |
|
|
Torque requirement: 6-10N·m扭矩要求：6-10N•m |
|
Engine hood strut assembly发动机罩撑杆组件
