Electrical › Wiper and washing system › Repair
风窗洗涤软管组件Ⅲ · T00617970

 Windshield washer hose assembly Ⅲ风窗洗涤软管组件Ⅲ

Removal procedure拆卸程序
1. Preparation1. 准备工作
1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，整车电源处于“OFF”状态。
2. Remove the windshield washer hose assembly III2. 拆卸风窗洗涤软管组件Ⅲ
Graphic
1 Disconnect windshield washer hose assembly IIB and windshield washer hose assembly IIIA.断开风窗洗涤软管组件ⅡB与风窗洗涤软管组件ⅢA的连接。
  Note:提示：
♦  Open the roof appropriately to remove the windshield washer hose assembly III.适当扒开顶棚，以便拆卸风窗洗涤软管组件Ⅲ。
Graphic
2 Disconnect the through-hole rubber sleeves at both ends of the windshield washer hose assembly IIIA, disconnect the windshield washer hose assembly IIIA from the rear window washer nozzle, and remove the windshield washer hose assembly IIIA.脱开风窗洗涤软管组件ⅢA的两端过孔胶套，断开风窗洗涤软管组件ⅢA与后风窗洗涤喷嘴，取下风窗洗涤软管组件ⅢA。
Installation procedure安装程序
1. Install windshield washer hose assembly Ⅲ1. 安装风窗洗涤软管组件Ⅲ
Graphic
1 Connect the windshield washer hose assembly IIIA to the rear windshield washer nozzle, and install the through-hole rubber sleeve of the windshield washer hose assembly IIIA.连接风窗洗涤软管组件ⅢA与后风窗洗涤喷嘴，安装风窗洗涤软管组件ⅢA的过孔胶套。
Graphic
2 Connect the windshield washer hose assembly IIB and the windshield washer hose assembly IIIA.连接风窗洗涤软管组件ⅡB与风窗洗涤软管组件ⅢA。
3 Install the ceiling assembly around the windshield washer hose assembly III.安装风窗洗涤软管组件Ⅲ周围顶棚总成。
2. Start the vehicle and check that the wiper and washing systems should be working normally.2. 启动车辆，检查雨刮与洗涤系统应正常工作