Drain pipe排水管
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
|
|
2. Remove the right front extension plate assembly2. 拆卸右前延伸板总成
|
|
3. Remove the passenger side lower right decorative panel assembly3. 拆卸副驾驶侧右下装饰板总成
|
|
4. Remove the right end cover assembly of the instrument panel4. 拆卸仪表板右侧端盖总成
|
|
5. Remove the right end cover of the instrument panel5. 拆卸仪表板右侧端盖盖板
|
|
6. Remove the right front inner sill trim panel assembly6. 拆卸右前内门槛饰板总成
|
|
7. Remove the drain pipe7. 拆卸排水管
1 Open the passenger compartment carpet assembly on the passenger side.掀开副驾驶侧乘客舱地毯总成。
|
 |
2 Pull out the through-hole rubber sleeve A, disconnect the drain pipe B from the HVAC assembly and take it out.拔出过孔胶套A，断开排水管B与HVAC总成的连接并取出。
|
Installation procedure安装程序
|
1. Install drain pipe1. 安装排水管
|
|
|
1 Place and adjust drain pipe B to the installation position, and install through-hole rubber sleeve A to the installation position.放置并调整排水管B到安装位置，安装过孔胶套A到安装位置。
|
|
2. Install the right front inner sill trim panel assembly2. 安装右前内门槛饰板总成
|
|
3. Install the end cover on the right side of the instrument panel3. 安装仪表板右侧端盖盖板
|
|
4. Install the right-side end cover assembly of the instrument panel.4. 安装仪表板右侧端盖总成
|
|
5. Install the passenger side lower right decorative panel assembly5. 安装副驾驶侧右下装饰板总成
|
|
6. Install the right front extension plate assembly6. 安装右前延伸板总成
|
|
7. Start the vehicle and check that the drain pipe should be working normally7. 启动车辆，检查排水管应正常工作
|