Accelerator pedal assembly加速踏板总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the accelerator pedal assembly2. 拆卸加速踏板总成
|
 |
1 Disconnect connector A, remove 3 fixing nuts ①, and remove the accelerator pedal assembly.断开接插件A，拆卸3颗固定螺母①，取下加速踏板总成。
|
Installation procedure安装程序
|
1. Install the accelerator pedal assembly1. 安装加速踏板总成
|
|
|
1 Place and adjust the accelerator pedal assembly to the installation position, install and tighten 3 fixing nuts ①, and connect connector A.放置并调整加速踏板总成到安装位置，安装3颗固定螺母①并紧固，连接接插件A。
|
|
2. Connect the negative terminal of the 12V battery, start the vehicle, and conduct a road test2. 连接蓄电池负极，起动车辆，路试检查
|