License plate light (left)牌照灯(左)

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the license plate light (left)2. 拆卸牌照灯(左)

1 Pry out the license plate light A.撬出牌照灯A。 Recommended tools: clip remover推荐工具：卡扣起子

2 Disconnect connector A and remove license plate light B.断开接插件A，取下牌照灯B。

Installation procedure安装程序

1. Install license plate light1. 安装牌照灯

1 Connect connector A to license plate light B.连接接插件A到牌照灯B。

2 Place and adjust license plate light A to the installation position, and press firmly to ensure it is installed in place.放置并调整牌照灯A到安装位置，用力按压确保安装到位。

2. Connect the negative terminal of the 12V battery, start the vehicle, and check that the license plate light should work normally.2. 连接蓄电池负极，启动车辆，检查牌照灯应正常工作