Battery sensor电池传感器
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the battery sensor2. 拆卸电池传感器
|
 |
1 Disconnect connector A, remove fixing nut ①, and remove battery sensor B.断开接插件A，拆卸固定螺母①，取下电池传感器B。
|
Installation procedure安装程序
|
1. Install the battery sensor1. 安装电池传感器
|
|
|
1 Connect the 12V battery negative wire harness to 12V battery sensor B, install and tighten the fixing nut ①, and connect connector A.连接蓄电池负极线束到电池传感器B，安装固定螺母①并紧固，连接接插件A。
|
|
2. Connect the negative terminal of the 12V battery and check that the vehicle is working normally when powered on and off.2. 连接蓄电池负极，检查车辆上下电应正常工作
|