Hatchback door frame seal掀背门门框密封条

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the hatchback door frame sealing strip2. 拆卸掀背门门框密封条

1 Pull out the hatchback door frame sealing strip from the installation position, and remove the hatchback door frame sealing strip A.将掀背门门框密封条从安装位置上拔出，取下掀背门门框密封条A。

Installation procedure安装程序

1. Install hatchback door frame sealing strip1. 安装掀背门门框密封条 1 Clean the car body.清洁车身。

2 Place and adjust the hatchback door frame sealing strip A to the installation position.放置并调整掀背门门框密封条A到安装位置。   Caution:注意： ♦  The bonding point of the hatchback door frame sealing strip should be at the lock position.掀背门门框密封条粘接处应位于锁扣位置。 ♦  After installation, you can use a rubber hammer to gently tap the sealing strip to install it in place.安装后可使用橡胶锤轻轻敲打密封条，将密封条安装到位。 ♦  Check whether the water-retaining lip of the outer ring of the rubber strip fits tightly with the car body.检查胶条外圈挡水唇边与车身是否贴合紧密。