Rear upper panel assembly后上面板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the rear upper panel assembly2. 拆卸后上面板总成

1 Pry out the rear upper panel assembly.撬出后上面板总成。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具   Note:提示： ♦  Pay attention to the 6 claw positions in the picture.注意图示6处卡爪位置。

Installation procedure安装程序

1. Install the rear upper panel assembly1. 安装后上面板总成

1 Place and adjust the rear upper panel assembly to the installation position, align the 6 claw positions shown in the figure and press firmly to ensure that it is installed in place.放置并调整后上面板总成到安装位置，对准图示6处卡爪位置用力按压，确保安装到位。