Infotainment head unit车载智能多媒体主机
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Disassemble the T-BOX assembly2. 拆卸T-BOX总成
|
|
3. Disassemble the infotainment head unit3. 拆卸车载智能多媒体主机
|
 |
1 Remove the 4 fixing nuts ① to remove the vehicle infotainment head unit from its installation position.拆卸4颗固定螺母①，使车载智能多媒体主机脱离安装位置。
2 Disconnect all connectors of the infotainment head unit and remove the infotainment head unit.断开车载智能多媒体主机所有接插件，取下车载智能多媒体主机。
|
Installation procedure安装程序
|
1. Install the infotainment head unit1. 安装车载智能多媒体主机
1 Connect all connectors to the car's infotainment head unit.连接所有接插件到车载智能多媒体主机。
|
|
|
2 Place and adjust the infotainment head unit to the installation position, install 4 fixing nuts ① and tighten them.放置并调整车载智能多媒体主机到安装位置，安装4颗固定螺母①并紧固。
|
|
2. Install T-BOX assembly2. 安装T-BOX总成
|
|
3. Connect the negative terminal of the 12V battery, start the vehicle, and check that the audio and entertainment system should work normally.3. 连接蓄电池负极，启动车辆，检查音响娱乐系统应正常工作
|