|
①General inspection一般检查
|
|
1. |
Check whether the ACANFD communication harness is damaged or broken.检查ACANFD通讯线束是否存在损坏、断裂等现象。
|
|
2. |
Check the ACANFD communication harness connector for loose connections or damage.检查ACANFD通讯线束接插件是否存在虚接、损坏等现象。
|
Are the test results normal?检查结果是否正常?
|
No否 |
Repair or replace the faulty communication harness.维修或更换故障通讯线束。 |
|
|
②Power on check上电检查
|
|
1. |
Repower the vehicle, use the diagnostic tool to read and clear the fault codes, and check whether the fault codes and symptoms are eliminated.车辆重新上电,使用诊断仪读取并清除故障码,检查故障码及症状是否排除。
|
Are the test results normal?检查结果是否正常?
|
Yes是 |
Fault resolved.故障排除。 |
|
|
③Check for electromagnetic interference检查电磁干扰
|
|
1. |
Check for sources of magnetic fields around the vehicle.检查车辆周围是否存在磁场源。
|
Are the test results normal?检查结果是否正常?
|
No否 |
Move the vehicle away from its current environment.使车辆驶离当前环境。 |
|
|
④Check the Autopilot Domain Controller检查自动驾驶域控制器
|
|
1. |
Use a diagnostic tool to read the fault code of the autonomous driving domain controller and check whether there is a fault on the autonomous driving domain controller.使用诊断仪读取自动驾驶域控制器故障码,检查自动驾驶域控制器是否存在故障。
|
Are the test results normal?检查结果是否正常?
|
No否 |
Troubleshoot according to the fault code.根据故障码排除故障。 |
|
|
⑤Check the integrated brake control system检查集成式制动控制系统
|
|
1. |
Check whether the integrated brake control system is normal.检查集成式制动控制系统是否正常。
|
Are the test results normal?检查结果是否正常?
|
No否 |
Overhaul the integrated brake control system.检修集成式制动控制系统。 |
|
|
⑥Replace forward radar更换前向雷达
|
|
1. |
Replace with a new forward radar and check whether the fault code and symptoms are eliminated.更换新的前向雷达,检查故障码及症状是否排除。
|
Are the test results normal?检查结果是否正常?
|
Yes是 |
Fault resolved.故障排除。 |
|
No否 |
Look for causes from other symptoms.从其他症状查找原因。 |
Caution:注意: |
|
♦
|
After replacing the forward radar, you need to use a diagnostic tool to recalibrate the forward radar.更换前向雷达后,需用诊断仪对前向雷达重新标定。 |
|
|