System description (external discharge)系统说明(对外放电)

Function introduction功能介绍

1.

The external discharge function is to connect the V2L/V2V external discharge cable delivered by the original factory to the AC charging port of the vehicle, and then invert the energy of the high-voltage battery into AC220V and deliver it to the electrical equipment.对外放电功能是通过原厂配送的V2L/V2V对外放电线缆与整车的交流充电口连接后，将动力电池的能量逆变成AC220V输送至用电设备。

2.

For electrical equipment with V2L function, the maximum power needs to be below 3kW. If electrical equipment with excessive power is used, the equipment may not be used normally; for charging vehicles with V2V function, the charging system must meet the corresponding national standard requirements for electric vehicle conductive charging systems.对于V2L功能的用电设备，其最大功率需要在3kW以下，若使用功率过大用电设备，设备存在不能正常使用的可能；对于V2V功能的充电车辆，其充电系统需满足相应的电动汽车传导充电系统的国标要求。

Discharge cutoff SOC setting放电截止SOC设置

Users can freely set the discharge end SOC through the central control screen. The discharge SOC value is adjustable within the range of 20% to 100%. The discharge end SOC setting has memory. After this setting, if the power of the high-voltage battery is lower than the set SOC threshold, the discharge cannot be started.用户通过中控屏可自由设置放电截至SOC，放电SOC值在20%~100%范围内可调，放电截至SOC设置具有记忆性，本次设置后若高压电池的电量低于设置的SOC阈值，则不能开启放电。

Discharge indicator light放电指示灯

The meaning of the discharge indicator light colors is as follows:放电指示灯颜色含义如下：