Left rear wheel arch trim front section assembly左后轮眉前段总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the left rear wheel fender front section assembly2. 拆卸左后轮眉前段总成

1 Pry out the left rear wheel fender front section assembly A.撬出左后轮眉前段总成A。 Recommended tools: clip remover推荐工具：卡扣起子   Note:提示： ♦  Pay attention to the 4 clip positions in the picture.注意图示4处卡扣位置。

Installation procedure安装程序

1. Install the left rear wheel fender front section assembly1. 安装左后轮眉前段总成

1 Place and adjust the left rear wheel fender front section assembly A to the installation position, align the clip position and press firmly to ensure that it is installed in place.放置并调整左后轮眉前段总成A到安装位置，对准卡扣位置用力按压，确保安装到位。