Expansion tank overflow pipe膨胀箱溢气管
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
|
|
2. Remove the expansion tank overflow pipe2. 拆卸膨胀箱溢气管
|
 |
1 Disconnect the expansion tank overflow pipe joints A and B, and remove the expansion tank overflow pipe.断开膨胀箱溢气管接头A、B，取下膨胀箱溢气管。
|
Installation procedure安装程序
|
1. Install the expansion tank overflow pipe1. 安装膨胀箱溢气管
|
|
|
1 Place and adjust the expansion tank overflow pipe to the installation position, and connect the expansion tank overflow pipe joints A and B.放置并调整膨胀箱溢气管到安装位置，连接膨胀箱溢气管接头A、B。
|
|
2. Fill the temperature control system coolant2. 加注温控系统冷却液
|
|
3. Start the vehicle and check that the cooling system should be working normally3. 启动车辆，检查冷却系统应正常工作
|