Left rear door outer lower trim panel assembly左后门外下饰板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the left rear door outer lower trim panel assembly2. 拆卸左后门外下饰板总成

1 Pry out the left rear door outer lower trim panel assembly A.撬出左后门外下饰板总成A。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具   Note:提示： ♦  Pay attention to the 6 clip positions in the picture.注意图示6处卡扣位置。

Installation procedure安装程序

1. Install the left rear door outer lower trim panel assembly1. 安装左后门外下饰板总成

1 Place and adjust the left rear door outer lower trim panel assembly A to the installation position, align the 6 clip positions shown in the figure and press firmly to ensure that it is installed in place.放置并调整左后门外下饰板总成A到安装位置，对准图示6处卡扣位置用力按压，确保安装到位。