Removal procedure拆卸程序
|
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
|
|
|
2. Remove the brake fluid reservoir assembly2. 拆卸制动储液罐总成
|
|
|
1 Loosen the hose clamp ① and remove the liquid tank connecting hose A from the installation position.松开软管夹箍①，使储液罐连接软管A脱离安装位置。
|
|
Caution:注意： |
|
♦
|
Extract the brake fluid from the reservoir. Brake fluid is corrosive. Do not contaminate the brake fluid to other parts of the vehicle.抽取储液罐制动液，制动液具有腐蚀性，不要将制动液沾染到车辆其他部位。 |
|
|
|
|
|
2 Remove the two fixing bolts ① and remove the brake fluid reservoir assembly.拆卸两颗固定螺栓①，取下制动储液罐总成。
|
|
Recommended tools: 13mm socket推荐工具：13mm套筒 |
|
Installation procedure安装程序
|
|
1. Install brake fluid reservoir assembly1. 安装制动储液罐总成
|
|
|
1 Place and adjust the brake fluid reservoir assembly to the installation position, install 2 fixing bolts ① and tighten them.放置并调整制动储液罐总成到安装位置，安装2颗固定螺栓①并紧固。
|
|
Recommended tools: 13mm socket推荐工具：13mm套筒 |
|
|
Torque requirement: 20-24N·m扭矩要求：20-24N•m |
|
|
|
2 Connect the fluid reservoir connecting hose A to the brake fluid reservoir assembly and secure it with the hose clamp ①.连接储液罐连接软管A到制动储液罐总成，使用软管夹箍①固定。
|
|
|
2. Start the vehicle and conduct road test inspection2. 起动车辆，路试检查
|
Brake fluid reservoir assembly制动储液罐总成
