Electrical › Heating air conditioning ventilation system › Repair
空调低压管总成Ⅰ · T00610490

 Air conditioning low pressure pipe assembly Ⅰ空调低压管总成Ⅰ

Removal procedure拆卸程序
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面,启用驻车制动,使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
2. Recycle refrigerant2. 回收制冷剂
3. Disassemble the air-conditioning low-pressure pipe assembly Ⅰ3. 拆卸空调低压管总成Ⅰ
Graphic
1 Remove the fixing nut ① and disconnect the pipeline.拆卸固定螺母①,断开管路连接。
Recommended tools: 10mm socket推荐工具:10mm套筒
Graphic
2 Remove the fixing bolt ①, disconnect the air-conditioning low-pressure pipe assembly I from the air-conditioning compressor, and take out the air-conditioning low-pressure pipe assembly I.拆卸固定螺栓①,断开空调低压管总成Ⅰ与空调压缩机的连接,取出空调低压管总成Ⅰ。
Recommended tools: 10mm socket推荐工具:10mm套筒
Installation procedure安装程序
1. Install air conditioning low pressure pipe assembly Ⅰ1. 安装空调低压管总成Ⅰ
Graphic
1 Place and adjust the air-conditioning low-pressure pipe assembly I to the installation position, connect the air-conditioning low-pressure pipe assembly I to the air-conditioning compressor, install the fixing bolts ① and tighten them.放置并调整空调低压管总成Ⅰ到安装位置,连接空调低压管总成Ⅰ到空调压缩机,安装固定螺栓①并紧固。
Recommended tools: 10mm socket推荐工具:10mm套筒
Torque requirement: 6-10N·m扭矩要求:6-10N•m
  Caution:注意:
♦  The O-ring of the air conditioning pipeline is a disposable part, please use new parts for each installation.空调管路O型圈为一次性部件,每次安装请使用新件。
Graphic
2 Connect the air conditioning pipe joint, install the fixing nut ① and tighten it.连接空调管路接头,安装固定螺母①并紧固。
Recommended tools: 10mm socket推荐工具:10mm套筒
Torque requirement: 6-10N·m扭矩要求:6-10N•m
  Caution:注意:
♦  The O-ring of the air conditioning pipeline is a disposable part, please use new parts for each installation.空调管路O型圈为一次性部件,每次安装请使用新件。
2. Add refrigerant2. 加注制冷剂
3. Start the vehicle, connect the negative terminal of the 12V battery, and check that the air conditioning system should work normally.3. 启动车辆,连接蓄电池负极,检查空调系统应正常工作