Rear panoramic parking camera后全景泊车摄像头

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the rear panoramic parking camera2. 拆卸后全景泊车摄像头

1 Pry out the rear panoramic parking camera A.撬出后全景泊车摄像头A。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具

2 Disconnect connector A and remove rear panoramic parking camera B.断开接插件A，取下后全景泊车摄像头B。

Installation procedure安装程序

1. Install rear panoramic parking camera1. 安装后全景泊车摄像头

1 Connect connector A to rear panoramic parking camera B.连接接插件A到后全景泊车摄像头B。

2 Place and adjust the rear panoramic parking camera to the installation position, press firmly and fasten it.放置并调整后全景泊车摄像头到安装位置，用力按压并扣紧。

2. Connect the negative terminal of the 12V battery and start the vehicle. After checking, the panoramic parking camera should work normally.2. 连接蓄电池负极，启动车辆，检查后全景泊车摄像头应正常工作