Hood lock cable handle发动机罩锁拉索手柄

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the hood lock cable handle2. 拆卸发动机罩锁拉索手柄

1 Pry out the hood lock cable handle A.撬出发动机罩锁拉索手柄A。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具

2 Disconnect the hood lock cable from the hood lock cable handle A, and remove the hood lock cable handle A.断开发动机罩锁拉索与发动机罩锁拉索手柄A的连接，取下发动机罩锁拉索手柄A。

Installation procedure安装程序

1. Install the hood lock cable handle1. 安装发动机罩锁拉索手柄

1 Connect the hood lock cable to the hood lock cable handle A.连接发动机罩锁拉索到发动机罩锁拉索手柄A。

2 Place and adjust the hood lock cable handle A to the installation position and ensure that it is installed in place.放置并调整发动机罩锁拉索手柄A到安装位置并确保安装到位。

2. Check that the engine hood unlocking lock should work properly2. 检查发动机罩解闭锁应正常工作