|
|
Note:提示： |
|
♦
|
The disassembly and assembly procedures for the side door lock latch are basically the same. The following content takes the left rear side door latch latch as an example.侧门锁锁扣的拆装程序基本相同，下述内容以左后侧门锁锁扣为例进行操作。 |
|
|
Removal procedure拆卸程序
|
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
|
|
|
2. Remove the side door lock latch2. 拆卸侧门锁锁扣
|
|
|
1 Remove the 2 fixing bolts ① and remove the side door lock catch A.拆卸2颗固定螺栓①，取下侧门锁锁扣A。
|
|
Recommended tools: T40 socket推荐工具：T40套筒 |
|
Installation procedure安装程序
|
|
1. Install the side door lock latch1. 安装侧门锁锁扣
|
|
|
1 Place and adjust side door lock latch A to the installation position, install 2 fixing bolts ① and tighten.放置并调整侧门锁锁扣A到安装位置，安装2颗固定螺栓①并紧固。
|
|
Recommended tools: T40 socket推荐工具：T40套筒 |
|
|
Torque requirement: 20–24N·m扭矩要求：20–24N•m |
|
|
|
2. Check the left rear door surface difference and make corresponding adjustments2. 检查左后车门面差，并做出相应调整
|
|
|
3. Start the vehicle and check that the left front door unlocking should work normally.3. 启动车辆，检查左前门解闭锁应正常工作
|
Side door lock latch侧门锁锁扣
