Front wiper motor and connecting rod assembly前刮水器电机及连杆总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the left side cover of the wiper cover2. 拆卸雨刮盖板左侧盖板 Reference: Wiper cover left cover参考：雨刮盖板左侧盖板

3. Remove the right side cover of the wiper cover3. 拆卸雨刮盖板右侧盖板 Reference: Wiper cover right side cover参考：雨刮盖板右侧盖板

4. Remove the left scraper arm4. 拆卸左刮臂 Reference: Left scraping arm参考：左刮臂

5. Remove the right scraper arm5. 拆卸右刮臂 Reference: Right scraping arm参考：右刮臂

6. Remove the wiper cover6. 拆卸雨刮盖板 Reference: Wiper cover参考：雨刮盖板

7. Remove the front wiper motor and connecting rod assembly7. 拆卸前刮水器电机及连杆总成

1 Disconnect connector A, remove 3 fixing bolts ①, and remove the front wiper motor and connecting rod assembly.断开接插件A，拆卸3颗固定螺栓①，取下前刮水器电机及连杆总成。 Recommended tools: 10mm socket推荐工具：10mm套筒

Installation procedure安装程序

1. Install the front wiper motor and connecting rod assembly1. 安装前刮水器电机及连杆总成

1 Place and adjust the front wiper motor and connecting rod assembly to the installation position, install and tighten 3 fixing bolts ①, and connect connector A.放置并调整前刮水器电机及连杆总成到安装位置，安装3颗固定螺栓①并紧固，连接接插件A。 Recommended tools: 10mm socket推荐工具：10mm套筒 Torque requirement: 6-10N·m扭矩要求：6-10N•m

2. Install the wiper cover2. 安装雨刮盖板 Reference: Wiper cover参考：雨刮盖板

3. Install the left scraper arm3. 安装左刮臂 Reference: Left scraping arm参考：左刮臂

4. Install the right scraper arm4. 安装右刮臂 Reference: Right scraping arm参考：右刮臂

5. Install the left side cover of the wiper cover5. 安装雨刮盖板左侧盖板 Reference: Wiper cover left cover参考：雨刮盖板左侧盖板

6. Install the right side cover of the wiper cover6. 安装雨刮盖板右侧盖板 Reference: Wiper cover right side cover参考：雨刮盖板右侧盖板

7. Connect the negative terminal of the 12V battery, start the vehicle, and check that the front wiper motor and connecting rod assembly should work normally.7. 连接蓄电池负极，启动车辆，检查前刮水器电机及连杆总成应正常工作