Side door upper buffer block侧门上缓冲块

Note:提示： ♦  The procedures for disassembling and assembling the buffer blocks on the side doors of the left front door and right front door are basically the same. The following content takes the left front door as an example.左前门、右前门侧门上缓冲块的拆装程序基本相同，下述内容以左前门为例进行操作。

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the upper buffer block of the side door2. 拆卸侧门上缓冲块

1 Turn counterclockwise to remove the buffer block A on the side door.逆时针旋转取下侧门上缓冲块A。

Installation procedure安装程序

1. Install the side door upper buffer block1. 安装侧门上缓冲块

1 Clockwise move the upper buffer block A on the side door to the installation position.顺时针侧门上缓冲块A到安装位置。