Spiral rubber buffer block Ⅰ螺旋式橡胶缓冲块Ⅰ

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Spiral rubber buffer block Ⅰ2. 螺旋式橡胶缓冲块Ⅰ 1 Open the hatchback door.打开掀背门。

2 Turn counterclockwise to remove the spiral rubber buffer block IA.逆时针旋转取下螺旋式橡胶缓冲块ⅠA。

Installation procedure安装程序

1. Install the spiral rubber buffer block Ⅰ1. 安装螺旋式橡胶缓冲块Ⅰ

1 Rotate the spiral rubber buffer block IA clockwise to the installation position.顺时针旋转安装螺旋式橡胶缓冲块ⅠA到安装位置。

2. Adjust hatchback door2. 调整掀背门