Water cut outside left rear door左后门外水切

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the left rear door outer water cutter2. 拆卸左后门外水切

1 Pry out and remove the left rear door outer water cutter.撬出并取下左后门外水切。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具   Caution:注意： ♦  Be careful when disassembling and be careful not to damage the parts and clips, scratch the paint, etc.拆卸时应谨慎操作，谨防损坏部件卡扣、刮伤车漆等。

Installation procedure安装程序

1. Install the left rear door outer water cutter1. 安装左后门外水切

1 Place and adjust the left rear door outer water cutter to the installation position, press firmly and fasten it.放置并调整左后门外水切到安装位置，用力按压并紧扣。   Note:提示： ♦  In order to unify the installation procedure, priority should be given to making the front end of the external water cutter appropriately close to the direction of the B-pillar and installed in place.为统一安装程序，应优先使外水切前端位置适当贴紧B柱方向并安装到位。