Removal procedure拆卸程序
|
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
|
|
|
2. Remove the left front door rubber strip2. 拆卸左前门胶条
|
|
|
1 Remove the fixing bolt ①.拆卸固定螺栓①。
|
|
Recommended tools: 10mm socket推荐工具：10mm套筒 |
|
|
|
2 Pry out and remove the left front door adhesive strip.撬出并取下左前门胶条。
|
|
Recommended tools: clip remover推荐工具：卡扣起子 |
|
Installation procedure安装程序
|
|
1. Install the left front door rubber strip1. 安装左前门胶条
|
|
|
1 Place and adjust the left front door rubber strip to the installation position, press firmly and tighten it.放置并调整左前门胶条到安装位置，用力按压并紧扣。
|
|
|
2 Install the fixing bolts ① and tighten them.安装固定螺栓①并紧固。
|
|
Recommended tools: 10mm socket推荐工具：10mm套筒 |
|
|
Torque requirement: 16-20N·m扭矩要求：16-20N•m |
|
|
|
2. Start the vehicle and check that the left front door rubber strip should be properly sealed.2. 启动车辆，检查左前门胶条应密封正常
|
Left front door rubber strip左前门胶条
