Left front door glass sliding strip左前门玻璃滑动胶条

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the left front door glass sliding strip2. 拆卸左前门玻璃滑动胶条 1 Lower the left front door window glass.降落左前门车窗玻璃。

2 Pull out the left front door glass sliding strip from the slot in the direction of the arrow.沿箭头方向从卡槽中抽出左前门玻璃滑动胶条。

Installation procedure安装程序

1. Install the left front door glass sliding strip1. 安装左前门玻璃滑动胶条

1 Insert and adjust the left front door glass sliding strip in the direction of the arrow to the installation position.沿箭头方向插入并调整左前门玻璃滑动胶条到安装位置。   Note:提示： ♦  Before installation, spray an appropriate amount of soapy water on the glass sliding strip and installation location.安装前可在玻璃滑动胶条与安装位置喷洒适量肥皂水。

2. Start the vehicle, raise and lower the left front door glass assembly, and check that the sliding rubber strip of the left front door glass is well sealed.2. 启动车辆，升降左前门玻璃总成，检查左前门玻璃滑动胶条应密封良好