The paint spraying process for rigid surfaces after sheet metal repair is similar to the paint spraying process for rigid surfaces, except that the following steps are added after grinding the primer and before spraying the basecoat:进行钣金修复后的刚性表面的油漆喷涂程序和刚性表面的油漆喷涂工艺类似，只是在底漆研磨后和喷涂底色漆之前增加了下列步骤：
|
2. |
Atomic ash grinding原子灰研磨 |
|
3. |
Blowing dust, degreasing, cleaning吹尘、除油、清洁 |
|
4. |
Scratching and filling eyelids刮涂填眼灰 |
|
5. |
Sanding the surface of old paint film旧漆膜表面磨毛 |
|
6. |
Clean, degrease, and mask areas not to be painted清洁、除油、遮蔽不喷漆区域 |
Paint treatment of rigid surfaces following sheet metal repairs进行钣金修复后的刚性表面的油漆处理