Examples of common paint film defect treatment processes常见漆膜缺陷处理工艺过程示例

1.

Before polishing, clean the surface to be polished with degreasing materials.抛光前将待抛光表面用脱脂材料清洗干净

2.

First, fully wet the sponge, squeeze out excess water, apply a small amount of polishing wax on the surface to be polished, and adjust the polishing machine speed先将海绵充分湿润，挤去多余水分，取少量上光蜡涂抹在待抛漆面上，并调整抛光机转速

3.

Apply the sponge to the paint surface and then turn on the machine at a speed of 2500-3000r/min, then press lightly for 3-5 seconds to perform the polishing process将海绵贴上漆面后再开机，转速2500-3000r/min，再轻压3-5s进行上光处理   Caution:注意： ♦  Keep the machine moving smoothly and gently during operation. Do not operate for too long to avoid overheating and burning the paint surface.操作时保持机器平稳轻轻移动，切忌时间过长，以免产生过热，灼伤漆面。

4.

Wipe off excess polish wax with a car cleaning cloth用擦车布将多余的上光蜡擦去