Adjust front combination lights调整前组合灯
Adjustment procedure调整程序
|
1. Ensure the tire inflation pressure is normal1. 保证轮胎充气压力正常
|
|
2. Do not damage or dirty the headlight light cover2. 不得损坏或弄脏大灯透光灯罩
|
|
3. Check that the reflector and LED lamp beads are normal3. 检查反光罩和LED灯珠应正常
|
|
4. The vehicle is empty4. 车辆空载
|
|
5. When the car drives for a certain distance, compress and release the front and rear suspension multiple times to adjust the suspension in place.5. 汽车行驶一段距离，多次压缩并释放前、后悬架，使悬架调节到位
|
|
6. Adjust the high and low beams according to local laws and regulations6. 按照当地的法律规定对远、近光灯进行调整
1 Drive the vehicle to an underground garage or a dark environment, and make the vehicle face a vertical light-colored wall (flat surface) about 10 meters away.将车辆行驶至地下车库或阴暗环境内，使车辆正对垂直浅色墙面(平面)10m左右。
2 Open the hood and brace.打开发动机罩并支撑。
|
 |
3 Use tools to rotate the far and low beam adjusters to adjust the internal and external angles and height of the light.使用工具旋转远、近光灯调节器，调节灯光的内外角度及高低。
|
