Check wiper and washer systems检查雨刮与洗涤系统

Inspection procedures检查程序

1. Test1. 测试 1 Check the wiper cover to see if there is any foreign matter. If so, clean it.检查雨刮盖板是否有异物，如有应清理干净。 2 Add water to the wiper blade to test.向雨刮盖板添加水进行测试。 3 If there is little or no water flow, remove the front wheel fenders and inspect the drain lines.如果水流过小或没有水流，请拆除前轮挡泥板检查排水管。

2. Check wiper motor and wiper blade2. 检查刮水电机和雨刮片 1 Clean the surface of the windshield, clean the wiper blade strips, add washer fluid, check the function, and adjust the nozzles if necessary.清洁风窗玻璃表面，清洁雨刮片胶条，加注洗涤液，检查功能，必要时调整喷嘴。

2 Check the wiper blade strips for cracks, cuts, deformation, wear, etc., and replace them if necessary.检查雨刮片胶条是否有裂痕、割伤、变形和磨损等，必要时更换。 3 Adjust the wiper combination switch to different positions and check that it should work well under each working condition.将雨刮组合开关调至不同位置，检查各工况下均应工作良好。