Chassis › Brake control system › Diagnosis
故障现象表 · T00609501

 Fault symptom table故障现象表

Using the chart below will help you find the cause of the problem, inspect each component in order, and repair or replace if necessary.使用下表将有助于找到问题的起因,按顺序检查每个部件,需要时维修或更换。
No.序号
Failure symptoms故障症状
Possible reasons可能原因
Solution解决办法
1
Integrated brake control unit does not work集成式制动控制单元不工作
1. The fuse is blown1.保险丝熔断
2. Faulty wiring harness or connector2.线束或接插件故障
3. The internal solenoid valve is stuck or damaged.3.内部电磁阀卡滞、损坏
4. Internal motor damage4.内部电机损坏
5.CAN communication failure5.CAN通讯故障
6. Integrated brake control unit failure6.集成式制动控制单元故障
2
Electronic parking control unit does not work电子驻车控制单元不工作
1. The fuse is blown1.保险丝熔断
Replace fuse更换保险丝
2. Faulty wiring harness or connector2.线束或接插件故障
Repair or replace faulty wiring harness or connector维修或更换故障线束或接插件
3.. Internal motor is damaged3..内部电机损坏
Repair or replace internal motor维修或更换内部电机
4.CAN communication failure4.CAN通讯故障
Repair CAN communication lines检修CAN通讯线路
5. Electronic parking control unit failure5.电子驻车控制单元故障
Repair electronic parking control unit检修电子驻车控制单元