Wheel hub decorative cover assembly轮毂装饰盖总成

Note:提示： ♦  The disassembly and assembly methods of the front and rear wheel hub decorative cap assemblies are the same. This chapter only takes the disassembly and assembly of the left front wheel hub decorative cap assembly as an example.前后轮毂装饰盖总成拆装方法相同，本章节仅以拆装左前轮毂装饰盖总成为例。

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the wheel hub decorative cover assembly2. 拆卸轮毂装饰盖总成

1 Remove the wheel hub decorative cover assembly.拆卸轮毂装饰盖总成。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具

Installation procedure安装程序

1. Install wheel hub decorative cover assembly1. 安装轮毂装饰盖总成

1 Place and adjust the wheel hub decorative cap assembly to the installation position and make sure it is installed in place.放置并调整轮毂装饰盖总成到安装位置并确定安装到位。

2. Land the vehicle, start and drive away from the lift2. 降落车辆，起动并驶离举升机