Tank connection hose储液罐连接软管

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the reservoir connecting hose2. 拆卸储液罐连接软管

1 Loosen the 2 hose clamps ①, pull out and remove the hose A connecting the liquid tank.松开2处软管夹箍①，拔出并取下储液罐连接软管A。   Caution:注意： ♦  Brake fluid is corrosive, so do not contaminate other parts of the vehicle with brake fluid.制动液具有腐蚀性，不要将制动液沾染到车辆其他部位。

Installation procedure安装程序

1. Install the reservoir connection hose1. 安装储液罐连接软管

1 Connect the brake fluid tank connecting hose A to the brake fluid tank assembly and secure it with the hose clamp ①.连接制动储液罐连接软管A到制动储液罐总成，使用软管夹箍①固定。

2. Start the vehicle and conduct road test inspection2. 起动车辆，路试检查