B2E8000 - TroubleshootingB2E8000-故障诊断

Fault code description故障码说明

DTC故障码(DTC)	Fault code description故障码描述	Possible cause of failure可能故障原因
B2E8000	CAN transceiver failureCAN收发器故障	1.SBM internal bus transceiver failure1.SBM 内部总线收发器故障

Troubleshooting steps故障诊断步骤

①Power on check上电检查

Repower the vehicle, use the diagnostic tool to read and clear the fault codes, and check whether the fault codes and symptoms are eliminated.车辆重新上电，使用诊断仪读取并清除故障码，检查故障码及症状是否排除。

Are the test results normal?检查结果是否正常？

Yes是

Fault resolved.故障排除。

No否

Go to step 2.去步骤2。

②Replace the smart Bluetooth module更换智能蓝牙模块

Replace with a new smart Bluetooth module and check whether the fault code and symptoms are eliminated.更换新的智能蓝牙模块，检查故障码及症状是否排除。

Are the test results normal?检查结果是否正常？

Yes是

Fault resolved.故障排除。

No否

Look for causes from other symptoms.从其他症状查找原因。

Caution:注意：

♦

After replacing the smart Bluetooth module, you need to use a diagnostic tool to recalibrate the smart Bluetooth module.更换智能蓝牙模块后，需用诊断仪对智能蓝牙模块重新标定。