B1EE376 - TroubleshootingB1EE376-故障诊断

Fault code description故障码说明

DTC故障码(DTC)	Fault code description故障码描述	Possible cause of failure可能故障原因
B1EE376	Millimeter wave radar has a fault and is installed in the wrong location毫米波雷达存在故障，错误的安装位置	1. The radar installation position is incorrect1.雷达安装位置不正确

Troubleshooting steps故障诊断步骤

①Power on check上电检查

1. Repower the vehicle, use the diagnostic tool to read and clear the fault codes, and check whether the fault codes and symptoms are eliminated.车辆重新上电，使用诊断仪读取并清除故障码，检查故障码及症状是否排除。 Are the test results normal?检查结果是否正常？ Yes是 Fault resolved.故障排除。 No否 Go to step 2.去步骤2。

②Check installation location检查安装位置

1. Check whether the forward radar is installed correctly.检查前向雷达安装是否正确。 Are the test results normal?检查结果是否正常？ Yes是 Go to step 3.去步骤3。 No否 Reinstall.重新安装。

③Replace forward radar更换前向雷达

1. Replace with a new forward radar and check whether the fault code and symptoms are eliminated.更换新的前向雷达，检查故障码及症状是否排除。 Are the test results normal?检查结果是否正常？ Yes是 Fault resolved.故障排除。 No否 Look for causes from other symptoms.从其他症状查找原因。   Caution:注意： ♦  After replacing the forward radar, you need to use a diagnostic tool to recalibrate the forward radar.更换前向雷达后，需用诊断仪对前向雷达重新标定。