Troubleshooting › Instrument cluster/driver information system › Diagnosis
B2A0813-故障诊断 · T00607081

 B2A0813 - TroubleshootingB2A0813-故障诊断

Fault code description故障码说明
DTC故障码(DTC)
Fault code description故障码描述
Possible cause of failure可能故障原因
B2A0813
The left lane change switch is faulty and the circuit is open.左变道开关存在故障,电路开路
1. Open circuit fault in the internal circuit of the button1.按键内部电路开路故障
2. Abnormal FPC cable connection2.FPC排线连接异常
Troubleshooting steps故障诊断步骤
①Power on check上电检查
1. Repower the vehicle, use the diagnostic tool to read and clear the fault codes, and check whether the fault codes and symptoms are eliminated.车辆重新上电,使用诊断仪读取并清除故障码,检查故障码及症状是否排除。
Are the test results normal?检查结果是否正常?
Yes是 Fault resolved.故障排除。
No否 Go to step 2.去步骤2。
②Replace the combination switch and clock spring assembly更换组合开关与时钟弹簧总成
1. Replace the combined switch and clock spring assembly with a new one, and check whether the fault code and symptoms are eliminated.更换新的组合开关与时钟弹簧总成,检查故障码及症状是否排除。
Are the test results normal?检查结果是否正常?
Yes是 Fault resolved.故障排除。
No否 Look for causes from other symptoms.从其他症状查找原因。
  Caution:注意:
♦  After replacing the combination switch and clock spring assembly, you need to use a diagnostic instrument to recalibrate the combination switch and clock spring assembly.更换组合开关与时钟弹簧总成后,需用诊断仪对组合开关与时钟弹簧总成重新标定。