|
①General inspection一般检查
|
|
1. |
Power state is "OFF", disconnect the negative terminal of the 12V battery.电源状态“OFF”,断开蓄电池负极。
|
|
2. |
Check whether the front dome light wiring harness is damaged or broken.检查前排顶灯线束是否存在损坏、断裂等现象。
|
|
3. |
Check the front dome light wiring harness connector for loose connection or damage.检查前排顶灯线束接插件是否存在虚接、损坏等现象。
|
Are the test results normal?检查结果是否正常?
|
No否 |
Repair or replace faulty wiring harness or connector.维修或更换故障线束或接插件。 |
|
|
②Check microphone power line检查麦克风电源线路
|
 |
|
1. |
Power status "ON".电源状态“ON”。
|
|
2. |
Use a digital multimeter to measure the voltage between pins 4 and 5 of the front dome light harness connector BD47.用数字万用表测量前排顶灯线束接插件BD47的4号针脚与5号针脚之间的电压。
Standard voltage value: about 5V标准电压值:约5V
|
Are the test results normal?检查结果是否正常?
|
No否 |
Repair or replace the microphone power harness.维修或更换麦克风电源线束。 |
|
|
③Replace front dome light更换前排顶灯
|
|
1. |
Replace the front dome light with a new one and check whether the fault code and symptoms are eliminated.更换新的前排顶灯,检查故障码及症状是否排除。
|
Are the test results normal?检查结果是否正常?
|
Yes是 |
Fault resolved.故障排除。 |
|
|
④Replace T-BOX更换T-BOX
|