P22901A - TroubleshootingP22901A-故障诊断

Fault code description故障码说明

DTC故障码(DTC)	Fault code description故障码描述	Possible cause of failure可能故障原因
P22901A	Abnormal insulation withstand voltage绝缘耐压异常	1. AC line insulation abnormality1.AC线绝缘异常

Troubleshooting steps故障诊断步骤

①Power on check上电检查

1. Repower the vehicle, use the diagnostic tool to read and clear the fault codes, and check whether the fault codes and symptoms are eliminated.车辆重新上电，使用诊断仪读取并清除故障码，检查故障码及症状是否排除。 Are the test results normal?检查结果是否正常？ Yes是 Fault resolved.故障排除。 No否 Go to step 2.去步骤2。

②Check high voltage wiring harness检查高压线束

1. Check the high-voltage wiring harness for rupture, damage, etc.检查高压线束是否存在破裂、破损等情况。 2. Check the high-voltage wiring harness for insulation faults.检查高压线束是否存在绝缘故障。 Are the test results normal?检查结果是否正常？ Yes是 Go to step 3.去步骤3。 No否 Replace the faulty high-voltage wiring harness.更换故障高压线束。

③Replacing the integrated electric drive assembly更换集成电力驱动总成

1. Replace the integrated electric drive assembly with a new one and check whether the fault code and symptoms are eliminated.更换新的集成电力驱动总成，检查故障码及症状是否排除。 Are the test results normal?检查结果是否正常？ Yes是 Fault resolved.故障排除。 No否 Look for causes from other symptoms.从其他症状查找原因。   Caution:注意： ♦  After replacing the integrated electric drive assembly, you need to use a diagnostic tool to recalibrate the integrated electric drive assembly.更换集成电力驱动总成后，需用诊断仪对集成电力驱动总成重新标定。