P16E301 - TroubleshootingP16E301-故障诊断

Fault code description故障码说明

DTC故障码(DTC)	Fault code description故障码描述	Possible cause of failure可能故障原因
P16E301	The load voltage does not drop in time负载电压未及时下降	1. The external load voltage does not drop to a safe value when powering on.1.上电时外部负载电压未下降至安全值

Troubleshooting steps故障诊断步骤

①Power on check上电检查

1. Power off the vehicle, let it sit for 5 minutes, then power it on again, and check whether the fault code and symptoms are eliminated.车辆下电，静置5分钟后重新上电，检查故障码及症状是否排除。 Are the test results normal?检查结果是否正常？ Yes是 Fault resolved.故障排除。 No否 Go to step 2.去步骤2。

②Check external high-voltage electrical appliances检查外部高压电器

1. Check whether the external high-voltage electrical appliance is faulty.检查外部高压电器是否存在故障。 2. Check whether there is a fault in the high-voltage wiring harness of external high-voltage electrical appliances.检查外部高压电器高压线束是否存在故障。 Are the test results normal?检查结果是否正常？ Yes是 Go to step 3.去步骤3。 No否 Replace faulty high-voltage electrical components.更换故障高压电器部件。

③Replace the battery pack assembly更换电池组箱总成

1. Replace the battery pack assembly with a new one and check whether the fault code and symptoms are eliminated.更换新的电池组箱总成，检查故障码及症状是否排除。 Are the test results normal?检查结果是否正常？ Yes是 Fault resolved.故障排除。 No否 Look for causes from other symptoms.从其他症状查找原因。   Caution:注意： ♦  After replacing the battery pack assembly, you need to use a diagnostic tool to recalibrate the battery pack assembly.更换电池组箱总成后，需用诊断仪对电池组箱总成重新标定。