Thermoset Plastic Scratch Repair热固性塑料刮伤的维修
|
1. Clean and dry the area to be repaired1. 清洗干燥待修部位
|
|
2. Remove the protruding material with sandpaper2. 用砂纸除去凸出的材料
|
|
3. Then clean the repaired area with detergent and let dry for 5 minutes.3. 然后用清洗剂清洗维修部位，晾干5min
|
|
4. Apply a layer of adhesive and let dry for 10 minutes.4. 涂一层粘结剂，晾干10min
|
|
5. Fill the uneven surface with adhesive and smooth it with a spatula5. 用粘结剂填充不平表面，抹刀抹平
|
|
6. Use infrared lamp to accelerate the curing process, adjust the temperature to 60~70℃ (140~158ºF), and heat for 15 minutes6. 用红外线灯加速固化过程，将温度调至60~70℃(140~158ºF)，加热15min
|
|
7. Use sandpaper to polish the recessed area7. 用砂纸打磨凹陷部位
|
|
8. Remove dust/wear debris8. 清除灰尘/磨屑
|
|
9. Apply a thin layer of adhesive and let dry for 10 minutes9. 涂一层薄薄的粘结剂，晾干10min
|
|
10. Follow the paint repair procedure on the surface of the plastic parts to restore the paint surface10. 按塑料件表面的漆面修补程序恢复漆面
|