Repair of plastic dents in thermal fixtures热固件塑料凹坑的维修
|
1. Clean and dry the parts to be repaired1. 清洗干燥待维修部件
|
|
2. Use a hot air blower to heat the dented area until the dent can be flattened with a suitable tool.2. 用热风机加热凹坑部位，直至可用合适的工具压平凹坑
|
|
3. Smooth the pitted area with sandpaper or emery paper3. 用砂纸或金刚砂纸打磨凹坑区域
|
|
4. Use detergent to clean the repaired area and wait for about 5 minutes to dry.4. 使用清洗剂清洗维修部位，等待5min左右晾干
|
|
5. Apply a thin layer of adhesive and wait for about 10 minutes to dry.5. 涂一层薄薄的粘结剂并等待10min左右晾干
|
|
6. Fill the uneven surface with adhesive and smooth it with a spatula6. 用粘结剂填充不平表面，用抹刀抹平
|
|
7. Use infrared lamp to accelerate the curing process, adjust the temperature to 60~70℃ (140~158ºF), and heat for about 15 minutes7. 用红外线灯加速固化过程，将温度调至60~70℃(140~158ºF)，加热15min左右
|
|
8. Use sandpaper to polish the pits8. 用砂纸打磨凹坑部位
|
|
9. Remove dust and grinding debris9. 去除灰尘磨屑
|
|
10. Apply a thin layer of adhesive and wait for about 10 minutes to dry.10. 涂一层薄薄的粘结剂，等待10min左右晾干
|
|
11. Follow the paint repair procedure on the surface of the plastic parts to restore the paint surface11. 按塑料件表面的漆面修补程序恢复漆面
|