Initialization of sunshade

Page 192

Initialization of sunshade

In some cases (such as sudden battery loss, after long-term vehicle use, sunshades become misaligned or trigger false anti-pinch making it impossible to close the sunshade properly), the sunroof/sunshade may need manual initialization and self-learning.

Sunshade initialization operation

1. Start the vehicle, press and hold

sunshade close soft key in the center console and the sunshade moves to the closed position. (Ignore this step if it is already in the closed position)

2. Long press the sunshade closing s

key in the center control screen and hold it, about 6s later the sunshade starts to move to the fully open position and continues to perform the closing action, after it is completely closed, release the key to complete the initialization and self-learning.

Sunshade initialization (False anti-pinch state)

operation

1. Start the vehicle, long press

sunshade open soft button on the central control screen, the sunshade will move to the fully open position, long press the sunshade close soft button on the central control screen and hold it, after about 6 seconds the button will change from lit to gray.

2. Long press the sunshade close s

button on the central control screen until the sunshade is completely closed, completing initialization and self-learning.

WARNING

◆ The anti-pinch function of the sunshade is disabled during the initialization and learning; therefore in this process, do not try to hinder the closing of sunshade by stretching any body part or placing any obstacles, otherwise, damage may be caused and the initialization result may be affected.

NOTE

◆ If the automatic closing function and anti-pinch function of the sunshade are still not recovered after the initialization, contact the GAC Service Center for inspection and repair.