Folding down of exterior rearview mirror when reversing

Page 141

Folding down of exterior rearview mirror when reversing

During reversing, the exterior rearview mirror will automatically fold down to a set angle, so that the driver can observe the surrounding environment.

The driver can turn on or off the folding down of the exterior rearview mirror through the center console display.

When the gearshift lever is moved out of the "R" position, the exterior rearview mirror will automatically reset.

NOTE

◆ Set the folding down angle of exterior rearview mirror when reversing through the center console display.

◆ The exterior rearview mirrors may reset automatically at high reversing speeds.

Reversing parking aid (RPA)

The RPA uses the ultrasonic sensors on the front and rear bumpers of the vehicle to detect the distance between the vehicle and obstacles, assisting the driver to park the vehicle and adjust the vehicle position.

Using RPA

When the gearshift lever is moved into the "R" position, the front and rear RPA will automatically turn on, and when the RPA recognizes an obstacle within the detection range, it will start to alarm.

When the gearshift lever is moved into the "D" or "N" position, the front RPA will start to work while the rear RPA will not. When the gearshift lever is moved into the "P" position, the RPA will turn off automatically.

Turning on and off RPA audible alarm

The RPA audible alarm can be turned on or off via the center console display.

Reversing radar system fault prompt

When a radar sensor malfunctions, the buzzer will sound for approximately 3 seconds upon the first activation of the reversing radar system, indicating a fault in the reversing radar system. When a radar sensor malfunctions, a corresponding radar fault icon will be displayed on the SVM interface to alert the user. If any radar sensor in the front or rear malfunctions, the corresponding front or rear reversing radar will not function.

WARNING

◆ The RPA cannot take the place of the driver’s observation of the surrounding environment. The driver shall focus on safe reversing and position adjustment according to the practical conditions.